Try to
export TERM=vt100
before YAST
WBR, Sergey
"Nix, Robert
P." To: [EMAIL PROTECTED]
<Nix.Robert@may cc:
o.edu> Subject: Installing Suse Linux and
stuck at Creating Filesystems...
Sent by: Linux
on 390 Port
<[EMAIL PROTECTED]
ARIST.EDU>
24.07.2002
18:59
Please respond
to Linux on 390
Port
I'm running YaST to install the Suse distribution of Linux/390. I've gotten
to the screen titled "Creating Filesystems". It lists several F-key choices
at the bottom, but only F6=Format works. Everything else says that I'll
lose changes if I exit now. I didn't want to exit; I wanted to set the
mount point. I'd be satisfied if any of the buttons would work, actually.
It won't let me continue because I have nothing defined as root, but I
can't define anything as root because the keys don't work... Where do I go
from here, other than to one of the support systems?
----
Robert P. Nix internet: [EMAIL PROTECTED]
Mayo Clinic phone: 507-284-0844
200 1st St. SW page: 507-255-3450
Rochester, MN 55905
----
"In theory, theory and practice are the same,
but in practice, theory and practice are different."
> -----Original Message-----
> From: Barton Robinson [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, July 23, 2002 5:39 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Linux S/390 Monitor
>
> My default for 'correcting' the linux processor numbers is to
> use TOTAL CPU time used by the virtual machine, but there is an
> option if the installation wishes to use Virtual time.
>
> Accuracy is based on one minute granularity. Very accurate to
> show the total linux utilization, slightly less accurate when
> analyzing individual processes, maybe off by as much as a couple
> percent under some situations??? But much closer than the
> potential order of magnitude as reported by TOP and other linux
> tools.... When i used data granularities of an hour, i could
> see larger discrepancies. One minute is easy and cheap....
>
> >From: Rob van der Heij <[EMAIL PROTECTED]>
> >At 14:59 22-07-02 -0700, Barton Robinson wrote:
> >
> >>ESALPS will also provide a "multiplier" so that you can
> >>correct your accounting data.
> >
> >That's a neat trick you can do when you have both numbers
> >available, as ESALPS does. Is there any way you can guess
> >how good the corrected numbers are?
> >I suppose you correct based on consumed cycles in emulation
> >mode because Linux will see that as its 100%, but somehow
> >you also need to spread the cycles in supervisor mode over
> >that to show the real cost?
> >
> >Rob
>
>
>
>
>
>
>
> "If you can't measure it, I'm Just NOT interested!"(tm)
>
> /************************************************************/
> Barton Robinson - CBW Internet: [EMAIL PROTECTED]
> Velocity Software, Inc Mailing Address:
> 196-D Castro Street P.O. Box 390640
> Mountain View, CA 94041 Mountain View, CA 94039-0640
>
> VM Performance Hotline: 650-964-8867
> Fax: 650-964-9012 Web Page: WWW.VELOCITY-SOFTWARE.COM
> /************************************************************/
