Crowley, Glen L writes: > I have an LPAR that shares a gb ethernet osa express adapter with OS/390 > LPAR's. I am using SUSE distribution as it is the only one that I found > that includes the OCO modules. I get the error that follows when setting up > my network definition. I have on ocasion be able to get this to work, but > 99% of the time it fails. Anybody have any ideas that might help me. > > Enter the device addresses for the qeth module, e.g. '0xf800,0xf801,0xf802' > or auto for autoprobing (auto): > > Starting with microcode level 0146, OSA-Express QDIO require a portname to > be set in the device driver. It identifies the port for sharing with other. > OS images, for example the PORTNAME dataset used by OS/390. > Do you have OSA Express microcode level 0146 or higher? > y > Note: If you share the card, you must use same portname > on all guest/lpars using the card. > Please enter the portname (must be 1 to 8 characters) to use: > osa1
That name might be case-sensitive; I can't remember if I've ever tried without explicit uppercase so it's only a guess. Does trying "OSA1" in caps make a difference? > qeth: Trying to use card with devnos 0xC40/0xC41/0xC42 > qeth: received an IDX TERMINATE on irq 0xAF4/0xAF5 with cause code 0x22 -- > try > another portname Are those device numbers right for the card you were intending to use? If anyone adds another OSA to your LPAR without telling you, you may end up with the wrong one. It might be safer to give the triple of device numbers explicitly at the "Enter the device addresses" prompt instead of letting it autodetect. --Malcolm -- Malcolm Beattie <[EMAIL PROTECTED]> Linux Technical Consultant IBM EMEA Enterprise Server Group... ...from home, speaking only for myself
