> I am installing a new linux lpar using redhat 7.2 Enigma with 2.4.9-38
> kernel.  The system successfully IPL's
> but I cannot load the lcs driver.  After the IPL I try to activate eth0
> and I see message "no lcs capable cards found".
> When I try "insmod lcs" or "insmod -f /lib/modules...../lcs" I receive the
> error "incorrect module parameters, including
> invalid IO or IRQ parameters" and syslog shows "no lcs cap.." again.
> When I try "insmod -v lcs" I receive the same error.
>
> Can someone shed some light on this?
>
> I have tried/verified the following:
>
>       verified this OSA works with marist linux LPAR running 2.2.19
> kernel.
>       tried ipldelay=5m with no success.
>       verified the OSA is available to the LPAR in OAT table.
>       verified the OSA is shared and available to the LPAR in HCD/IOGEN.
>       verified I am running redhat OCO drivers for 2.4.9-38
>
> I am also including the contents of several key files.
>
> Thanks in advance and I apologize for the verbose message.
>
> Eric Fernald
> Lead Systems Engineer
> ACS State and Local Solutions
>
>
> /var/log/messages
>
> kernel: Starting lcs module  $Revision: 1.1.2.1 $ $Date: 2002/03/29
> 00:14:37 $
> kernel: with chandev support,with multicast support, with ethernet
> support, with token ring support.
> kernel: debug: reserved 16 areas of 2 pages for debugging lcs
> kernel: debug: lcs: new level 0
> kernel: No lcs capable cards found
> kernel: Terminating lcs module.
> kernel: debug: unregistering lcs
> kernel: debug: freeing debug area 0fa0ca00 (lcs)
> kernel: Starting lcs module  $Revision: 1.1.2.1 $ $Date: 2002/03/29
> 00:14:37 $
> kernel: with chandev support,with multicast support, with ethernet
> support, with token ring support.
> kernel: debug: reserved 16 areas of 2 pages for debugging lcs
> kernel: debug: lcs: new level 0
> kernel: No lcs capable cards found
> kernel: Terminating lcs module.
> kernel: debug: unregistering lcs
> kernel: debug: freeing debug area 0fa0ca00 (lcs)
>
>
> /etc/modules.conf
>
> alias parport_lowlevel parport_pc
> alias eth0 lcs
> #options lcs noauto=1 devno_portno_pairs=0x980,0
>
>
> /etc/sysconfig/network-scripts/ifcfg-eth0
>
> DEVICE=eth0
> USERCTL=no
> ONBOOT=yes
> BOOTPROTO=none
> BROADCAST=192.168.124.255
> NETWORK=192.168.124.0
> NETMASK=255.255.255.0
> IPADDR=192.168.124.131
>
>
> /etc/chandev.conf
>
> lcs0,0x980,0x981,0,0
>
>
> /proc/chandev
>
> chan_type key bitfield
> ctc=0x1,escon=0x2,lcs=0x4,osad=0x8,qeth=0x10,claw=0x20
>
> *'s for cu/dev type/models indicate don't cares
>
> cautious_auto_detect: on
>
> persist = 0x00
>
> use_devno_names: off
>
> Channels enabled for detection
>   chan     cu      cu     dev   dev    max     checksum  use hw  auto
> recovery
>   type    type    model  type  model  port_no. received   stats      type
> ==========================================================================
> ====
>   0x20   0x3088   0x61      *        *     0 no      no
> not_operational,no_path,revalidate,device_gone
>   0x08   0x3088   0x62      *        *     0 no      no
> not_operational,no_path,revalidate,device_gone
>   0x10   0x1731   0x05   0x1732   0x05    0 no      no
> not_operational,no_path,revalidate,device_gone
>   0x10   0x1731   0x01   0x1732   0x01    0 no      no
> not_operational,no_path,revalidate,device_gone
>   0x04   0x3088   0x60      *        *     1 no      no
> not_operational,no_path,revalidate,device_gone
>   0x06   0x3088   0x1f      *        *    15 no      no
> not_operational,no_path,revalidate,device_gone
>   0x05   0x3088   0x08      *        *    15 no      no
> not_operational,no_path,revalidate,device_gone
>   0x04   0x3088   0x01      *        *    15 no      no
> not_operational,no_path,revalidate,device_gone
>
> Forced devices
>   chan defif read   write  data   memory      port         ip    hw   host
> adapter   api
>   type  num  devno  devno  devno  usage(k) protocol no.  chksum stats name
> name     name
> ==========================================================================
> =====================
>   0x04    0  0x0980 0x0981 0x0000 default         0       0    0
>
> channels detected
>               chan    cu    cu   dev    dev                          in
> chandev
>   irq  devno  type   type  model type  model pim      chpids         use
> reg.
> ==========================================================================
> =====
> 0x04c1 0x0980 0x04  0x3088 0x60  0x0000 0x00 0x80 0x98ffffffffffffff  no
> no
> 0x04c2 0x0981 0x04  0x3088 0x60  0x0000 0x00 0x80 0x98ffffffffffffff  no
> no
> 0x04d0 0x098f 0x08  0x3088 0x62  0x0000 0x00 0x80 0x98ffffffffffffff  no
> no
> 0x04f7 0x0b4f 0x08  0x3088 0x62  0x0000 0x00 0x80 0xb4ffffffffffffff  no
> no
> 0x155a 0xc000 0x04  0x3088 0x60  0x0000 0x00 0x80 0x0cffffffffffffff  no
> no
> 0x155b 0xc001 0x04  0x3088 0x60  0x0000 0x00 0x80 0x0cffffffffffffff  no
> no
> 0x1569 0xc00f 0x08  0x3088 0x62  0x0000 0x00 0x80 0x0cffffffffffffff  no
> no


Reply via email to