Hi I'm having problems setting getting my qeth interface to work running on a virgin 2.4.19 kernel patched with the may 2002 stream.
I suspect that it might be a problem with chandev and syntax, and I have been screwing around with chandev for some time but to no avail. insmod qeth returns: ------ IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver 802.1Q VLAN Support v1.7 Ben Greear <[EMAIL PROTECTED]> All bugs added by David S. Miller <[EMAIL PROTECTED]> qdio: loading QDIO base support version 2 ($Revision: 1.120.2.1 $/$Revision: 1.56.2.2 $) debug: qdio_setup: new level 2 debug: qdio_labs: new level 2 debug: qdio_sense: new level 2 debug: qdio_trace: new level 2 qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.260.2.13 $/$Revision: 1.86.2.2 $/$Revision: 1.31 $:IPv6:VLAN) qeth: allocated 0 spare buffers debug: qeth_setup: new level 3 debug: qeth_misc: new level 2 debug: qeth_data: new level 2 debug: qeth_control: new level 2 debug: qeth_sense: new level 2 debug: qeth_qerr: new level 2 debug: qeth_trace: new level 2 qeth: Trying to use card with devnos 0x960/0x961/0x962 qeth: received an IDX TERMINATE on irq 0x11/0x12 with cause code 0x17 qeth: IDX_ACTIVATE on read channel irq 0x11: negative reply qeth: There were problems in hard-setting up the card. ------ /etc/chandev.conf contains: noauto;qeth0,0x0960,0x0961,0x0962;addparms,0x10,0x0960,0x0962,portname:LNXLAN02 I have been given these paramaters by the kind people in charge of our z/VM (ie. i know linux, not so much mainframes and z/VM), and if needed I could probably provide more details of the hardware and how things are "coupled". -- Best regards/hilsen Jxrgen Birkhaug
