Pat, You need to go back and look again. Here are the relevant lines from /etc/rc.config on my LCDS image: # # IP Adresses # IPADDR_0="10.1.15.62"
# # network device names (e.g. "eth0") # NETDEV_0="iucv0" # # parameteres for ifconfig, simply enter "bootp" or "dhcpclient" to use the # respective service for configuration # sample entry for ethernet: # IFCONFIG_0="192.168.81.38 broadcast 192.168.81.63 netmask 255.255.255.224" # IFCONFIG_0="10.1.15.62 pointopoint 10.1.15.61 mtu 1500 up" Once you've updated the file, run /sbin/SuSEconfig to update all the files that are fed from /etc/rc.config. Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED]]On Behalf Of Abruzzese, Pat Sent: Monday, December 09, 2002 2:37 PM To: [EMAIL PROTECTED] Subject: Network connections I have cloned an image of Linux. SuSE 7.0 - 2.2.16 I checked /etc/rc.config, /etc/route.conf and have found nothing in these files. Is there another way to change the IP address of this image and the peer address. I'm using VCTC 900 & 901 how do I define these to Linux, they are in both tcpip and linux directory entry and I have a couple statement in the profile exec's. This Linux image was installed by someone else and I don't have any documentation about the installation or modifications.
