I have installed Debian "woody" with the IBM OCO QETH and QDIO modules for 2.4.17. Installation went fine and able to telnet in and to do install. Upon booting from dasd the first time, I get the following error: Setting up IP spoofing protection: rp_filter. Configuring network interfaces: modprobe: modprobe: Can't locate module eth0 SIOCSIFADDR: No such device modprobe: modprobe: Can't locate module eth0 eth0: ERROR while getting interface flags: No such device modprobe: modprobe: Can't locate module eth0 SIOCSIFNETMASK: No such device modprobe: modprobe: Can't locate module eth0 SIOCSIFBRDADDR: No such device modprobe: modprobe: Can't locate module eth0 eth0: ERROR while getting interface flags: No such device modprobe: modprobe: Can't locate module eth0 eth0: ERROR while getting interface flags: No such device done.
The parms used at OSA setup are add_parms,0x10,0xc40,0xc42,portname=OSA1 qeth,0xc40,0xc41,0xc42 have also tried eth0,0xc40,0xc41,0xc42 Anybody been here or have any suggestions? Glen Crowley Lead Systems Programmer Arkansas Blue Cross Blue Shield 501-378-2432 [EMAIL PROTECTED]