Ken, There might be more information in the kernel ring buffer. Do a "dmesg" command (if there's one on the initrd) and post the output from that (the relevant parts should be at the end).
Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED]]On Behalf Of Ken Maxtutis Sent: Wednesday, December 18, 2002 10:42 AM To: [EMAIL PROTECTED] Subject: Problem with Redhat & OSA/QDIO recognition Hi, I am experiencing a problem when installing RedHat Linux 7.2 in VM. I am trying to initialize a GigEthernet OSA card. I followed all procedures as far as linking the IBM OCO modules with the RedHat distribution. Also, all microcode and VM maintenance should be up to date. A few months ago I had attempted the same thing with an ATM OSA with no luck. Any idea what could be the problem? What other debugging can be done? Thanks, Ken Maxtutis Senior Systems Programmer Konica Business Technologies Windsor, CT. USA email: [EMAIL PROTECTED] Here's the error I'm getting: lib/qeth.o: init_module: %m Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters SIOCSIFADDR: No such device eth0: unknown interface: No such device SIOCSIFMTU: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device eth0: unknown interface: No such device SIOCADDRT: No such device SIOCADDRT: No such device lo Link encap:Local Loopback Here's my parm file: root=/dev/ram0 ro ip=off ramdisk_size=12000 DASD=200-20f CHANDEV=qeth1,0xe200,0xe201,0xe202 HOST=mflinux1.konicabt.com:eth0:10.3.13.50:1500 NETWORK=10.3.13.0:255.255.255.0:10.255.255.255:10.3.13.1 DNS=10.1.250.20:10.1.250.21 SEARCHDNS=konicabt.com RPMSERVER=ftp://anonymous:XXX@[EMAIL PROTECTED]/pub/rh390-7.2/RedHat/RPMS QETHPARM=add_parms,0x10,0xe200,0xe202,portname:OSAFD And a copy of proc/chandev: cat chandev chan_type key bitfield ctc=0x1,escon=0x2,lcs=0x4,osad=0x8,qeth=0x10,claw=0x20 *'s for cu/dev type/models indicate don't cares cautious_auto_detect: on persist = 0x00 use_devno_names: off Channels enabled for detection chan cu cu dev dev max checksum use hw auto recovery type type model type model port_no. received stats type ============================================================================ == 0x20 0x3088 0x61 * * 0 no no not_operational,no_path,revalidate,device_gone 0x08 0x3088 0x62 * * 0 no no not_operational,no_path,revalidate,device_gone 0x10 0x1731 0x05 0x1732 0x05 0 no no not_operational,no_path,revalidate,device_gone 0x10 0x1731 0x01 0x1732 0x01 0 no no not_operational,no_path,revalidate,device_gone 0x04 0x3088 0x60 * * 1 no no not_operational,no_path,revalidate,device_gone 0x06 0x3088 0x1f * * 15 no no not_operational,no_path,revalidate,device_gone 0x05 0x3088 0x08 * * 15 no no not_operational,no_path,revalidate,device_gone 0x04 0x3088 0x01 * * 15 no no not_operational,no_path,revalidate,device_gone Forced devices chan defif read write data memory port ip hw host adapter api type num devno devno devno usage(k) protocol no. chksum stats name name name ============================================================================ =================== 0x10 1 0xe200 0xe201 0xe202 default 0 0 0 # MORE...
