Do you need to run Silo or a similar utility for your release level?
"Seifert,
Harald" To: [EMAIL PROTECTED]
<Harald.Seifert cc:
@huk-coburg.de> Subject: parmfile editing
Sent by: Linux
on 390 Port
<LINUX-390
01/15/2003 10:14
AM
Please respond
to Linux on 390
Port
I'm running SuSE Linux on a zSeries LPAR with Kernel 2.4.17 and got the
following little problem:
I have added the parmfile with three new dasd devices 39da,39db,39dc :
dasd=39d7,39d6,39db,39da,39dc root=/dev/dasdb1 noinitrd
I have not added new mount points within /etc/fstab
because I want to check, if Linux added the new devices ;
after re-boot I did a
cat /proc/dasd/devices and see only
39d7 as dasda and 39d6 as dasdb active.
What's working is the
echo "add device range=39da" >> proc/dasd/devices.
But it's only temporary !
Did I miss something ?
Any documentation known about parmfile syntax and /etc/fstab syntax.
Kind Regards
Harald Seifert
Informatik-Systemprogrammierung
HUK Coburg
Bahnhofsplatz
96444 Coburg
Phone +049 (0)9561-961787
Fax +049 (0)9561-963671
Mailto [EMAIL PROTECTED]
<< Attachment Removed : Seifert, Harald.vcf >>
