On Tue, Jan 28, 2003 at 05:37:08PM -0600, Ketchens, LeMarr T. (RyTull) wrote: > For some reason, we can not get our HiperSockets to work. We are trying to > use virtual hipersockets, but I was wondering if it would be better to use > actual Physical HiperSockets. I really need some help. From examples > within the PROFILE TCPIP (DEVICE & LINK, HOME and GATEWAY) to the IFCONFIGs > used to define the hipersockets to z/VM and to the Linux Guest. Here's how > we are setup. We are running z/VM 4.3.0 in an IFL on a z/800 box. We have > OSA-E Gigabit Ethernet at our disposal. We have z/VM up and running with > with 2 Linux Guests (SuSE 2.4.7). The two guests are ip connected via > virtual CTCs. We would like to get the HiperSockets working (virtual or > physical). To get to the outside world we also have a Cisco Router, if that > matters. At this point, I would appreciate any insight into correcting this > problem. Thanks
Apply all the service from SuSE. The initial SLES 7 didn't work with virtual HiperSockets, but after enough patches you get both a kernel and drivers that will drive them just fine. Adam
