Funny you should ask this; I was just in the book looking for the same command.
Try "Linux for S/390 - Device Drivers and Installation Commands". Mine says 14 September, Linux kernel 2.4 on the cover. (Well, it's a .pdf file, so cover may not be the right term... But you get the idea.) The file I have it in is l390dd05.pdf, but I don't remember where I originally found it. The "manual number" at the bottom of the cover page is "LNUX-1203-05". Inside is says "Fifth Edition - 14 September 2001" so there may be something more current. ---- Robert P. Nix internet: [EMAIL PROTECTED] Mayo Clinic phone: 507-284-0844 RO-CE-8-857 page: 507-270-1182 200 First St. SW Rochester, MN 55905 ---- "Codito, Ergo Sum" "In theory, theory and practice are the same, but in practice, theory and practice are different." > -----Original Message----- > From: Kittendorf, Craig [SMTP:[EMAIL PROTECTED] > Sent: Tuesday, February 25, 2003 1:13 PM > To: [EMAIL PROTECTED] > Subject: Changing /proc/dasd/devices > > This is going to sound silly, but I use the following add dasd devices: > echo "add device range=xxxx" >> /proc/dasd/devices > but can't remember where I learned it. > > Anyone point me to docs describing this process? > > Thanks, Craig
