Mark, Thanks. I guess I will have to do another IOCDS change. I think I'll try to install this one dynamically, instead of with a power on reset.
>>> [EMAIL PROTECTED] 03/06/03 17:40 PM >>> Eric, There are no Linux/390 distributions that include the CLAW driver in the installation starter files (yet), so that isn't an option. Yes, you can hook two ESCON channels together to get a communication path going. It's a _little_ more involved that what you said, but not a lot. You need to make sure that the two ends of the connection are not both genned as CTC (one end has to be CNC?), routing will be something that needs attending to, etc. You won't be able to use the MVSNFS facility to NFS export the files, since that requires authentication stuff that won't be on the initrd. If you have an FTP server enabled, that should work. Mark Post +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ This electronic mail transmission contains information from P & H Mining Equipment which is confidential, and is intended only for the use of the proper addressee. If you are not the intended recipient, please notify us immediately at the return address on this transmission, or by telephone at (414) 671-4400, and delete this message and any attachments from your system. Unauthorized use, copying, disclosing, distributing, or taking any action in reliance on the contents of this transmission is strictly prohibited and may be unlawful. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
