Hi, I want to do a linux dump with the dump tool.... well first of all I prepared a dasd (/dev/dasdj1), after that I tried to do an zipl, which results in an error.
I formatted the dasd in ldl and cdl with no change... I tried to do zipl dump_eckd and I tried zipl -d /dev/dasdj1.... no change. How to I have to prepare the dasd? regards, - Tim - lxchr002:/ # dasdfmt -b 4096 -f /dev/dasdj Drive Geometry: 3338 Cylinders * 15 Heads = 50070 Tracks I am going to format the device /dev/dasdj in the following way: Device number of device : 0x209 Labelling device : yes Disk label : VOL1 Disk identifier : 0X0209 Extent start (trk no) : 0 Extent end (trk no) : 50069 Compatible Disk Layout : yes Blocksize : 4096 --->> ATTENTION! <<--- All data of that device will be lost. Type "yes" to continue, no will leave the disk untouched: yes Formatting the device. This may take a while (get yourself a coffee). Finished formatting the device. Rereading the partition table... ok lxchr002:/ # lxchr002:/ # lxchr002:/ # lxchr002:/ # fdasd -a /dev/dasdj auto-creating one partition for the whole disk... writing volume label... writing VTOC... rereading partition table... lxchr002:/ # lxchr002:/ # lxchr002:/ # lxchr002:/ # zipl dump_eckd Warning: All information on /dev/dasdj1 will be lost, are you sure to create a dump partition (y/n) :y Error opening eckd bootloader input file /boot/2.4.19/eckd0. Error: Could not install dump record for eckd-type devices with z/OS compatible layout. lxchr002:/ # Disk label : VOL1 Disk identifier : 0X0209 Extent start (trk no) : 0 Extent end (trk no) : 50069 Compatible Disk Layout : yes Blocksize : 4096 --->> ATTENTION! <<--- All data of that device will be lost. Type "yes" to continue, no will leave the disk untouched: yes Formatting the device. This may take a while (get yourself a coffee). Finished formatting the device. Rereading the partition table... ok lxchr002:/ # lxchr002:/ # fdasd /dev/dasdj reading volume label: VOL1 reading vtoc : ok Command action m print this menu p print the partition table n add a new partition d delete a partition v change volume serial t change partition type r re-create VTOC and delete all partitions u re-create VTOC re-using existing partition sizes s show mapping (partition number - data set name) q quit without saving changes w write table to disk and exit Command (m for help): q exiting... lxchr002:/ # fdasd -a /dev/dasdj auto-creating one partition for the whole disk... writing volume label... writing VTOC... rereading partition table... lxchr002:/ # lxchr002:/ # mc lxchr002:/ # zipl dump_eckd Warning: All information on /dev/dasdj1 will be lost, are you sure to create a dump partition (y/n) :y Error opening eckd bootloader input file /boot/2.4.19/eckd0. Error: Could not install dump record for eckd-type devices with z/OS compatible layout. lxchr002:/ # cat /etc/zipl.conf [defaultboot] default=ipl [ipl] target=/boot/2.4.19/zipl image=/boot/2.4.19/zilo-kernel/image #ramdisk=/boot/2.4.19/initrd parameters="dasd=0200-0210,2000-205f root=/dev/dasdb1 noinitrd" [dump_eckd] target = /boot/2.4.19 dumpto = /dev/dasdj1 lxchr002:/ # ____________________________________________________________________________ Jetzt bei WEB.DE FreeMail anmelden = 1qm Regenwald schuetzen! Helfen Sie mit! Nutzen Sie den Serien-Testsieger. http://user.web.de/Regenwald
