linux07:/home # zipl --help
<skip>
-d <PARTITION> or --dumpto <PARTITION>
<PARTITION> specifies the device node of the partition on which
the _dump_
will be created.
Example: /dev/dasdb1 or /devfs/dasd/0192/part1
To do "a second bootable dasd" You have to do the next steps:
1. Edit the new zipl.conf (/appl/etc/zipl.conf)
2. chroot /appl
3. zipl
4. exit.
WBR, Sergey
Moloko Monyepao <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
08.07.2003 14:22
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: zipl
Hi!
I am trying to create a second bootable dasd. I copied the boot directory
to my /dev/dasdc1 mounted as /appl, when I run zipl -d /dev/dasdc1 -p
parmfile -i vmlinuz-2.4.9-17tape I get the following error
Option error: You supplied both - image and dumpto parameters from
configuration file or command-line. Please specify only one of these in
one job.
Moloko Monyepao
OS/390 System Programmer
arivia.kom
Tel : +27 11 800 3372
NOTICE: Please note that this eMail, and the contents thereof, is subject
to the standard arivia.kom email disclaimer which may be found at:
http://www.arivia.co.za/disclaimer.htm. If you cannot access the disclaimer through
the URL attached, and you
wish to receive a copy thereof, please send an eMail to
[EMAIL PROTECTED] or call (011) 233-0800. You will receive the
disclaimer by return email or fax.
