On the SLES8 system,

ps -ax | grep port
  364 ?        S      0:00 /sbin/portmap
rpcinfo -p
   program vers proto   port
    100000    2   tcp    111  portmapper
    100000    2   udp    111  portmapper
    100024    1   udp   1024  status
    100024    1   tcp   1024  status
    100003    2   udp   2049  nfs
    100003    3   udp   2049  nfs
    100003    2   tcp   2049  nfs
    100003    3   tcp   2049  nfs
    100021    1   udp   1026  nlockmgr
    100021    3   udp   1026  nlockmgr
    100021    4   udp   1026  nlockmgr
    100021    1   tcp   1027  nlockmgr
    100021    3   tcp   1027  nlockmgr
    100021    4   tcp   1027  nlockmgr
    100005    1   udp   1027  mountd
    100005    1   tcp   1028  mountd
    100005    2   udp   1027  mountd
    100005    2   tcp   1028  mountd
    100005    3   udp   1027  mountd
    100005    3   tcp   1028  mountd
dlnxtest:~ # mount -t nfs -o ro,intr linuxvm1:/xyz /mnt
mount: RPC: Port mapper failure - RPC: Unable to receive


On the SLES7 system (linuxvm1),

 ps -ax | grep port
22731 ?        S      0:00 /sbin/portmap
rpcinfo -p
   program vers proto   port
    100000    2   tcp    111  portmapper
    100000    2   udp    111  portmapper

I'm not sure why the difference.  I even did a "rcportmap restart" and got the same 
thing.

"Great Minds discuss ideas.  Average minds discuss events.  Small minds discuss 
people."  - Admiral Hyman Rickover
Gordon Wolfe, Ph.D.  (425)856-5940
VM Enterprise Servers, The Boeing Company

> ----------
> From:         Sal Torres/SBC Inc.
> Reply To:     Linux on 390 Port
> Sent:         Friday, July 11, 2003 11:19 AM
> To:   [EMAIL PROTECTED]
> Subject:      Re: Guest Lans on SLES8
> 
> *** Reply to note of Fri, 11 Jul 2003 14:16:52 -0400 (EDT)
> *** by [EMAIL PROTECTED]
> rpcinfo -p should tell you if portmapper is working.
> 
> Sal
> "Post, Mark K" <[EMAIL PROTECTED]> writes:
> >Gordon,
> >
> >None of those are the portmapper:
> ># ps ax | grep port
> >   98 ?        S      0:00 /sbin/rpc.portmap
> >
> >
> >Mark Post
> >
> >-----Original Message-----
> >From: Wolfe, Gordon W [mailto:[EMAIL PROTECTED]
> >Sent: Friday, July 11, 2003 2:12 PM
> >To: [EMAIL PROTECTED]
> >Subject: Re: Guest Lans on SLES8
> >
> >
> >Thanks Mark,
> >
> >It appears to be running on both the SLES8 and SLES7 servers.  ps -ax | grep
> >rpc shows the same on both systems:
> >
> >  163 ?        SW     0:00 /sbin/rpc.statd
> >  275 ?        SW     0:00 [rpciod]
> >  278 ?        S      0:00 /usr/sbin/rpc.mountd
> >
> >"Great Minds discuss ideas.  Average minds discuss events.  Small minds
> >discuss people."  - Admiral Hyman Rickover
> >Gordon Wolfe, Ph.D.  (425)856-5940
> >VM Enterprise Servers, The Boeing Company
> >
> >> ----------
> >> From:         Post, Mark K
> >> Reply To:     Linux on 390 Port
> >> Sent:         Friday, July 11, 2003 11:04 AM
> >> To:   [EMAIL PROTECTED]
> >> Subject:      Re: Guest Lans on SLES8
> >>
> >> Gordon,
> >>
> >> You need to be running portmapper on the local system, as well as the
> >remote
> >> system.
> >>
> >>
> >> Mark Post
> >>
> >> -----Original Message-----
> >> From: Wolfe, Gordon W [mailto:[EMAIL PROTECTED]
> >> Sent: Friday, July 11, 2003 1:57 PM
> >> To: [EMAIL PROTECTED]
> >> Subject: Guest Lans on SLES8
> >>
> >>
> >> As I posted to this list yesterday, I have been able to convert TCPIP
> >> communications on SLES8 under VM from VCTC over to Guest Lans.
> >>
> >> I have Telnet, ssh, samba, ftp and apache all working happily with guest
> >> lans.
> >>
> >> I can't seem to get nfs to mount a location on another (SLES7 with VCTC)
> >> server.  This is a mount that worked before going to guest lans with the
> >> SLES8 server.
> >>
> >> The error message I get when trying to do the NFS mount is
> >>
> >> mount: RPC: Port mapper failure - RPC: Unable to receive
> >>
> >> I had updated the following files to get guest lans to work> 
> >> /etc/sysconfig/network/ifcfg-hsi0
> >> /etc/sysconfig/network/routes
> >> /etc/modules.conf
> >> /etc/chandev.conf
> >> and also the following with the new IP address:
> >> /etc/ssh/sshd_config
> >> /etc/samba/smb.conf
> >> /etc/hosts
> >> /etc/hosts.allow
> >>
> >> It looks like rpc isn't working right.  I don't see anything in /etc/rpc
> >> (default from SLES8 install) that would be a problem.
> >> and if I do ps -ax | grep rpc I get
> >>   382 ?        S      0:00 /sbin/rpc.statd
> >>   504 ?        SW     0:00 [rpciod]
> >>   505 ?        S      0:00 /usr/sbin/rpc.mountd
> >>
> >> I'm sure I've just missed something somewhere.  Anyone have any ideas?
> >>
> >> "Great Minds discuss ideas.  Average minds discuss events.  Small minds
> >> discuss people."  - Admiral Hyman Rickover
> >> Gordon Wolfe, Ph.D.  (425)856-5940
> >> VM Enterprise Servers, The Boeing Company
> >>
> >>
> 
> 

Reply via email to