Terry,
I wanted to point something out, it is my understanding that in fact TAM
3.9 is not certified on zLinux. Are you aware of that as well or have you
heard otherwise?
Thanks!
Eric Sammons
FRIT - Infrastructure Engineering
Terry Spaulding <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
07/29/2003 09:30 AM
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: Re: DB2 UDB V7.2 install problem on SuSE SLES7
S/390 with kernel timer patch ............
Eric,
The link did the trick. I entered the link and used ./db2setup and
everything installed no problem.
I was also installing HTTP from WAS V5 with Fixpak 1 on another SuSE SLES7
which worked ok for the install.
When I tried to do ./apachectl start I received the same error as in the
DB2 UDB V7 install complaining about the
missing lib. I entered the same link and now ./apachectl start works and
HTTP is up.
Thanks for the tip............
--------------------------------------------------------------------------------------------------------------------------------------
Eric wrote:
I installed TAM 4.1 and that is why I have UDB V8. Ahh the
requirements....
Anyhow, I installed the following RPMs instead of using the db2inst
script.
---------------------------------------------------------------------------------------------------------------------------------------
First I would recommend using IBM DB2 8.1. I was able to get around this
error by doing the following:
ln -s /usr/lib/libstdc++-libc6.2-2.so.3 /usr/lib/libstdc++-libc6.1-2.so.3
I then executed the rpm installs with the following options
----------------------------------------------------------------------------------------------------------------------------------------
Regards,
Terry L. Spaulding
IBM Global Services
Tele: 781-895-2802 Tie/L: 362-2802
Pager: 800-759-8888 pin:1718699
Fax: 781-895-2659
[EMAIL PROTECTED]
