I am running within an LPAR on 3 disk units;

 unit 123d on volser LIN3
 unit 123e on volser LIN4
 unit 132f on volser LIN5

 Our dasd is a IBM shark model 2105-F20:  emulating 3390-3 disk
 drives.  Our tape drives are on a IBM VTS model 3494-B10: emulating
 3590 Magstar tape drives.

 I have identified that I ran DFDSS. Data Facility Data Set Services
 utility backup to off load the Linux system to tape.

 I am trying to restore them to three different disk units.
 So, unit 123D is copied to unit 113E, unit 123E is copied to unit
 1611, and unit 132f is copied to unit 1242.

     Running     Standby
        123D    ===     113E
        123E    ===     1611
        132F    ===     1242

 On the running system, I IPL from unit 123D.  Units 123E and 132F are
 managed by LVM.  My goal is to have a "hot standby" set of disks that
 I can start running if the current "running" system hangs up or
 crashes.  I have to show that I can recover from a
 disaster.  So far I have not been able to make that work.

 Your assistance is much appreciated.

>From my running system:

Here is the output from the "cat /etc/fstab" command:

>>      mypprnt1:~ # cat /etc/fstab
>>      /dev/dasda1          /                    ext3       defaults
1 1
>>      /dev/system/var      /var                 reiserfs   defaults
1 2
>>      /dev/system/opt      /opt                 reiserfs   defaults
1 2
>>      /dev/system/home     /home                reiserfs   defaults
1 2
>>      /dev/dasda2          swap                 swap       pri=42
0 0
>>      devpts               /dev/pts             devpts     mode=0620,gid=5
0 0
>>      proc                 /proc                proc       defaults
0 0

Here is the output from the "cat /proc/dasd/devices" command:

>>      mypprnt1:~ # cat /proc/dasd/devices
>>      123d(ECKD) at ( 94:  0) is dasda      : active at blocksize: 4096,
601020 blocks, 2347 MB
>>      123e(ECKD) at ( 94:  4) is dasdb      : active at blocksize: 4096,
601020 blocks, 2347 MB
>>      132f(ECKD) at ( 94:  8) is dasdc      : active at blocksize: 4096,
601020 blocks, 2347 MB

Here is the output from the "cat /proc/partitions" command:

>>      mypprnt1:~ # cat /proc/partitions
>>      major minor  #blocks  name     rio rmerge rsect ruse wio wmerge
wsect wuse running use aveq
>>
>>        58     1    2310144 lvmb 0 0 0 0 0 0 0 0 0 0 0
>>        58     2    1363968 lvmc 0 0 0 0 0 0 0 0 0 0 0
>>        58     3    1048576 lvmd 0 0 0 0 0 0 0 0 0 0 0
>>        94     0    2404080 dasda 2720 7105 78600 23690 1069 2098 25432
17230 0 22530 40920
>>        94     1    1819152 dasda1 2710 7105 78520 23690 1069 2098 25432
17230 0 22530 40920
>>        94     2     584832 dasda2 2 0 16 0 0 0 0 0 0 0 0
>>        94     4    2404080 dasdb 237 1381 12992 16090 1852 1965 30608
8960 0 10670 25050
>>        94     5    2403984 dasdb1 230 1381 12936 16080 1852 1965 30608
8960 0 10660 25040
>>        94     8    2404080 dasdc 321 1325 13248 5020 65 125 1560 740 0
3190 5760
>>        94     9    2403984 dasdc1 314 1325 13192 5010 65 125 1560 740 0
3180 5750

Reply via email to