Hi all, i've just installed zvm 4.4, we've been using 4.3 for about a
year, i've updated the user directory, but when i ipl a linux with 3 qdio
devices, i receive the following messages:
qdio: loading QDIO base support version 2 ($Revision: 1.120.2.1
$/$Revision: 1.56.2.2 $)
debug: qdio_setup: new level 2
debug: qdio_labs: new level 2
debug: qdio_sense: new level 2
debug: qdio_trace: new level 2
qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.260.2.16
$/$Revision: 1.86.2.2 $/$Revision: 1.31.4.1 $:IPv6:VLAN)
qeth: allocated 0 spare buffers
debug: qeth_setup: new level 3
debug: qeth_misc: new level 2
debug: qeth_data: new level 2
debug: qeth_control: new level 2
debug: qeth_sense: new level 2
debug: qeth_qerr: new level 2
debug: qeth_trace: new level 2
qeth: Trying to use card with devnos 0x504/0x505/0x503
qeth: received an IDX TERMINATE on irq 0x8/0x9 with cause code 0x04
qeth: IDX_ACTIVATE on read channel irq 0x8: negative reply
qeth: There were problems in hard-setting up the card.
qeth: Trying to use card with devnos 0x500/0x501/0x502
qeth: Device 0x500/0x501/0x502 is an OSD Express card (level: f4f0)
with link type Gigabit Eth (portname: NIC500)
qeth: Trying to use card with devnos 0x2000/0x2001/0x2002
qeth: Device 0x2000/0x2001/0x2002 is an OSD Express card (level: 0326)
with link type Gigabit Eth (portname: OSA1)
eth1: no IPv6 routers present
eth0: no IPv6 routers present
The configuration is the following:
user direct entry:
USER LXRTR1 MAINT 064M 128M
ACCOUNT ENLLINUX
MACHINE ESA
IPL 190
IUCV ALLOW
CPU 00
CONSOLE 009 3215
DEDICATE 2000 2000
DEDICATE 2001 2001
DEDICATE 2002 2002
SPECIAL 500 QDIO 3 SYSTEM SERVICIO
SPECIAL 503 QDIO 3 SYSTEM PROD01
LINK MAINT 190 190 RR
LINK MAINT 19D 19D RR
LINK MAINT 19E 19E RR
MDISK 191 3390 0016 0010 LNXPRF MR ALL SOME FEW
MDISK 200 3390 0001 0092 LXSW00 MR ALL SOME FEW
MDISK 201 3390 0499 0498 ROOT01 MR ALL SOME FEW
Device 2000-2002 is a OSA Express GB.
lxrtr1:~# cat /etc/modutils/0chandev.chandev
add_parms,0x10,0x2000,0x2002,primary_router,portname:OSA1
qeth0,0x2000,0x2001,0x2002
add_parms,0x10,0x500,0x502,portname:NIC500
qeth1,0x500,0x501,0x502
add_parms,0x10,0x503,0x505,portname:NIC503
qeth2,0x503,0x504,0x505
lxrtr1:~# cat /proc/chandev
chan_type key bitfield
ctc=0x1,escon=0x2,lcs=0x4,osad=0x8,qeth=0x10,claw=0x20
*'s for cu/dev type/models indicate don't cares
cautious_auto_detect: on
persist = 0x00
use_devno_names: off
Channels enabled for detection
chan cu cu dev dev max checksum use hw auto
recovery
type type model type model port_no. received stats type
==============================================================================
0x02 0x3088 0x1e * * 0 no no
not_operational,no_path,revalidate,device_gone
0x20 0x3088 0x61 * * 0 no no
not_operational,no_path,revalidate,device_gone
0x08 0x3088 0x62 * * 0 no no
not_operational,no_path,revalidate,device_gone
0x10 0x1731 0x05 0x1732 0x05 0 no no
not_operational,no_path,revalidate,device_gone
0x10 0x1731 0x01 0x1732 0x01 0 no no
not_operational,no_path,revalidate,device_gone
0x04 0x3088 0x60 * * 1 no no
not_operational,no_path,revalidate,device_gone
0x06 0x3088 0x1f * * 15 no no
not_operational,no_path,revalidate,device_gone
0x05 0x3088 0x08 * * 15 no no
not_operational,no_path,revalidate,device_gone
0x04 0x3088 0x01 * * 15 no no
not_operational,no_path,revalidate,device_gone
Forced devices
chan defif read write data memory port ip hw host
adapter api
type num devno devno devno usage(k) protocol no. chksum stats name
name name
===============================================================================================
0x10 2 0x0503 0x0504 0x0505 default 0 0 0
0x10 1 0x0500 0x0501 0x0502 default 0 0 0
0x10 0 0x2000 0x2001 0x2002 default 0 0 0
Registered probe functions
probefunc shutdownfunc msck_notfunc chan devices devices
type found active
===============================================================
0x04871140 0x04873c38 0x04870e44 0x10 2 2
Initialised Devices
read write data read write data chan port dev dev
memory read msck write msck data msck
irq irq irq devno devno devno type no. ptr name
usage(k) status status status
=====================================================================================================================
0x0004 0x0005 0x0006 0x0500 0x0501 0x0502 0x10 0 0x005dd800 eth1
8192 good good good
0x0001 0x0002 0x0003 0x2000 0x2001 0x2002 0x10 0 0x005dd600 eth0
8192 good good good
Total device memory usage 16384k.
channels detected
chan cu cu dev dev in
chandev
irq devno type type model type model pim chpids use
reg.
===============================================================================
0x0001 0x2000 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0000000000000000 yes
yes
0x0002 0x2001 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0000000000000000 yes
yes
0x0003 0x2002 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0000000000000000 yes
yes
0x0004 0x0500 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0900000000000000 yes
yes
0x0005 0x0501 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0900000000000000 yes
yes
0x0006 0x0502 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0900000000000000 yes
yes
0x0007 0x0503 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0a00000000000000 no
no
0x0008 0x0504 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0a00000000000000 no
no
0x0009 0x0505 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0a00000000000000 no
no
driver specific parameters
chan lo hi driver
type devno devno parameters
=============================================================================
0x10 0x0503 0x0505 portname:NIC503
0x10 0x0500 0x0502 portname:NIC500
0x10 0x2000 0x2002 primary_router,portname:OSA1
If i re-IPL 4.3, the interface is configured without problems.
Any idea?
Thanks.
--
Alejandro Leyva Rabinovich.
Jefe de la Unidad Departamental de Soporte Ticnico
(Administracisn de Mainframe).
Direccisn General de Informatica.
Secretarma de Finanzas.
Gobierno del Distrito Federal.
