I have messed this one up good
After migrating to another network and changing the IP addresses I have
messed up the routing tables of our SUSE system
Here is some output from this confused system. Any Help would be
appreciated.
Setting up routing (using /etc/route.conf)
[1mError while excuting:
/sbin/route add default gw 10.38.135.1 [m
SIOCADDRT: Network is unreachable
Setting up routing..failed
Starting RPC portmap daemon..done
ifconfig
eth0 Link encap:Ethernet HWaddr 00:09:6B:F6:38:8F
inet addr:10.38.135.38 Mask:255.255.255.0
inet6 addr: fe80::209:6bff:fef6:388f/10 Scope:Link
UP RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:3097 (3.0 Kb)
Interrupt:7
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.38.135.0 * 255.255.255.0 U 0 0 0 eth0
cat /etc/route.conf
#
# /etc/route.conf
#
# In this file you can configure your static routing...
#
# This file is read by /sbin/init.d/route.
# 192.168.0.1 0.0.0.0 255.255.255.255 ippp0
# default 192.168.0.1
10.38.135.0 0.0.0.0 255.255.255.0
eth0
default 10.38.135.1
uname -a
Linux vmlinux 2.4.7-SuSE-SMP #1 SMP Wed Oct 17 15:31:03 GMT 2001 s390
unknown
TIA, \|/
(. .)
____ooO-(_)-Ooo____
Larry Davis, 6-2380