To get some idea what's going on, change the first tar options to
-vclpSf
and see what that looks like. If that looks fine, then try changing that
back to the original, and add a "v" to the second tar options.
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Dave
MYERS
Sent: Wednesday, March 24, 2004 4:48 PM
To: [EMAIL PROTECTED]
Subject: tar command not working - copying /usr to /mnt
We're using the procedure at www.linuxvm.org to copy /usr to an lvm
When we enter the tar command (below) ... the prompt comes right back...
1. tar -clpSf - . | (cd /mnt ; tar -xpSf - )
Any ideas?
Tia
Dave Myers
Denver Solutions Group
Senior Systems Engineer
Office Phone:�� (303) 996-7112
Cellular Phone: (303) 619-0782
Home Office:��� (303) 948-0027
Fax:����������������� (303) 706.1713
e-mail: [EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send email
to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
