Hmm. Not to mention that he doesn't use the Makefile to do the installation, so that will have to be redone as well if/when Neale changes anything in there.
I was going to ask if Thomas had looked at the SRPM I'd uploaded to linuxvm.org, but when I pulled it down to check something in it, rpm doesn't recognize it as being a valid RPM file. Maybe I did something utterly stupid like an ASCII upload instead of binary. I'll try to get a new version out there today. Mark Post -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Arnd Bergmann Sent: Tuesday, March 30, 2004 8:18 AM To: [EMAIL PROTECTED] Subject: Re: cpint RPM 1.1.6 for RHEL 3 On Tuesday 30 March 2004 01:16, Cameron, Thomas wrote: > I am including this as a source RPM because it has to be built for the > kernel version you are running. �Every time you update the kernel you > need to rebuild the source RPM and then upgrade the package for your > new kernel. Unfortunately, you have hardcoded the kernel version number into the spec file, so after a kernel update, the source RPM won't be usable any more without modifications. Arnd <>< ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
