May be historical reasons. Those parameters are not required for this function. I have this working on z/VM 4.3 with SLES8 SP3. Q SIGNALS shows them all shutdown enabled.
On Mon, 2004-04-26 at 16:14, Marcy Cortes wrote: > Do you also need in the /etc/zipl.conf kernel parameter line vmpoff=LOGOFF > vmhalt=LOGOFF or do I just have that for historical reasons? > > What level of VM? Does CP Q SIGNALS show your guest enabled? > > I get that "kernel: CAD:" message and then the shutdown. Is that the last > you receive? > > My messages: > HCPMID6001I TIME IS 00:00:00 PDT MONDAY 04/26/04 > > > > CAD: Sending SIGINT to PID 1... > > Apr 26 14:11:01 sles8 kernel: CAD: Sending SIGINT to PID 1... > > Apr 26 14:11:01 sles8 kernel: klogd 1.4.1, ---------- state change > ---------- > Apr 26 14:11:02 sles8 kernel: Inspecting /boot/System.map-2.4.21-94-default > > INIT: Switching to runlevel: 0 > > Apr 26 14:11:02 sles8 kernel: Loaded 10177 symbols from > /boot/System.map-2.4.21 > Apr 26 14:11:02 sles8 kernel: Symbols match kernel version 2.4.21. > > Apr 26 14:11:02 sles8 kernel: Loaded 341 symbols from 13 modules. > > Boot logging started on /dev/ttyS0(/dev/console) at Mon Apr 26 14:11:12 > 2004 > Master Resource Control: previous runlevel: 3, switching to runlevel: 0 > > Shutting down inetd > > ..done > > > > Shutting down CRON daemon > > ..done > > Shutting down mail service (Postfix) > > ..done > > > > Shutting down service at daemon > > ..done > > Shutting down Name Service Cache Daemon > > ..done > > > > Umount SMB File System > > ..unused > > Shutting down RPC portmap daemon > > ..done > > Shutting down SNMP: > > snmpd > > <snip> > > Marcy Cortes > Wells Fargo Services Company > -----Original Message----- > From: Rich Smrcina [mailto:[EMAIL PROTECTED] > Sent: Monday, April 26, 2004 13:52 > To: [EMAIL PROTECTED] > Subject: Re: [LINUX-390] Monthly forehead bruising: inittab & ctrlaltdel > > Your responses are correct and inittab looks OK (from memory)... > > Is it not working? The first time you will need to restart the init > process. I don't recall the exact syntax, but it should be in the > archive. > > On Mon, 2004-04-26 at 15:32, Nick Laflamme wrote: > > I'm back for my monthly efforts to get SIGNAL SHUTDOWN support in a > > SLES8 image working under VM. In the month since I last beat my head > > against this particular wall, I've made sure this image has the latest > > and greatest patches on it. It's at SP 3 and some other fixes released > > by SuSE, 2.4.21-107-default, according to uname -r. > > > > Is there any sort of verification tool for /etc/inittab to rule out any > > manner of stupid typos, bad assumptions, and other faults? > > > > What kinds of log messages does one see when a SIGNAL SHUTDOWN is > > correctly caught? I see single lines in /var/log/messages and > > /var/log/warn that > > > > (date) (time) (systemname) "kernel: CAD: Sending SIGNINT to PID 1..." > > > > I can't tell if I should expect more than that or if that itself is a > > warning. > > > > I know I've asked about this before on this list, and several of you > > have repeated the syntax for /etc/inittab, typically: > > > > ca:12345:ctrlaltdel:/sbin/shutdown -h now > > > > > > Given that I seem to have that right and seem to be at a current-enough > > (too current?) level of SLES 8, what else do I look for? > > > > Thanks, > > Nick > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
