Marcy,

If you want your guests to actually logoff before z/VM shuts down, then keep
them.  If you only care if they're "down" at that point, then you can take
those parms out.


Mark Post

-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] Behalf Of
Marcy Cortes
Sent: Monday, April 26, 2004 5:14 PM
To: [EMAIL PROTECTED]
Subject: Re: Monthly forehead bruising: inittab & ctrlaltdel


Do you also need in the /etc/zipl.conf kernel parameter line vmpoff=LOGOFF
vmhalt=LOGOFF  or do I just have that for historical reasons?

What level of VM?  Does CP Q SIGNALS show your guest enabled?

I get that "kernel: CAD:" message and then the shutdown.  Is that the last
you receive?

My messages:
HCPMID6001I  TIME IS 00:00:00 PDT MONDAY 04/26/04



CAD: Sending SIGINT to PID 1...

Apr 26 14:11:01 sles8 kernel: CAD: Sending SIGINT to PID 1...

Apr 26 14:11:01 sles8 kernel: klogd 1.4.1, ---------- state change
----------
Apr 26 14:11:02 sles8 kernel: Inspecting /boot/System.map-2.4.21-94-default

 INIT: Switching to runlevel: 0

Apr 26 14:11:02 sles8 kernel: Loaded 10177 symbols from
/boot/System.map-2.4.21
Apr 26 14:11:02 sles8 kernel: Symbols match kernel version 2.4.21.

Apr 26 14:11:02 sles8 kernel: Loaded 341 symbols from 13 modules.

 Boot logging started on /dev/ttyS0(/dev/console) at Mon Apr 26 14:11:12
2004
Master Resource Control: previous runlevel: 3, switching to runlevel: 0

Shutting down inetd

..done



Shutting down CRON daemon

..done

Shutting down mail service (Postfix)

..done



Shutting down service at daemon

..done

Shutting down Name Service Cache Daemon

..done



Umount SMB File System

..unused

Shutting down RPC portmap daemon

..done

Shutting down SNMP:

snmpd

<snip>

Marcy Cortes
Wells Fargo Services Company
-----Original Message-----
From: Rich Smrcina [mailto:[EMAIL PROTECTED]
Sent: Monday, April 26, 2004 13:52
To: [EMAIL PROTECTED]
Subject: Re: [LINUX-390] Monthly forehead bruising: inittab & ctrlaltdel

Your responses are correct and inittab looks OK (from memory)...

Is it not working?  The first time you will need to restart the init
process.  I don't recall the exact syntax, but it should be in the
archive.

On Mon, 2004-04-26 at 15:32, Nick Laflamme wrote:
> I'm back for my monthly efforts to get SIGNAL SHUTDOWN support in a
> SLES8 image working under VM. In the month since I last beat my head
> against this particular wall, I've made sure this image has the latest
> and greatest patches on it. It's at SP 3 and some other fixes released
> by SuSE, 2.4.21-107-default, according to uname -r.
>
> Is there any sort of verification tool for /etc/inittab to rule out any
> manner of stupid typos, bad assumptions, and other faults?
>
> What kinds of log messages does one see when a SIGNAL SHUTDOWN is
> correctly caught? I see single lines in /var/log/messages and
> /var/log/warn that
>
> (date) (time) (systemname) "kernel: CAD: Sending SIGNINT to PID 1..."
>
> I can't tell if I should expect more than that or if that itself is a
> warning.
>
> I know I've asked about this before on this list, and several of you
> have repeated the syntax for /etc/inittab, typically:
>
> ca:12345:ctrlaltdel:/sbin/shutdown -h now
>
>
> Given that I seem to have that right and seem to be at a current-enough
> (too current?) level of SLES 8, what else do I look for?
>
> Thanks,
> Nick
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to