It works!!....thank you so much Franz...I appreciate it.
Best regards.
Hugo Rivera
Franz Josef
Pohlen To: [EMAIL PROTECTED]
<[EMAIL PROTECTED]> cc:
Sent by: Linux on Subject: Re: New in z/VM....MAINT
MNT191 A lost.
390 Port
<[EMAIL PROTECTED]
IST.EDU>
05/17/2004 02:35
AM
Please respond to
Linux on 390 Port
Hi Hugo,
You should logon with user operator (vm system console). The following
command may not work on maint because of missing option DEVMAINT in the user
directory, but on operator it should work.
Enter the following commands
link maint 191 444 rr
Ready; T=0.01/0.01 11:22:51
q mdisk 444 loc
11:22:59 TargetID Tdev OwnerID Odev Dtype Vol-ID Rdev StartLoc
Size
11:22:59 OPERATOR 0444 MAINT 0191 3390 440RES 0440 653 175
Ready; T=0.01/0.01 11:22:59
Now the system tells you where the maint 191 is located. Now you only have
to restore from your DDR backup the cylinder portion of maint 191. In my
case it is the 440RES from cyl 653 to 827 (175 cylinders).
Logon to maint
Attach a tape as 181 to yourself and mount the ddr backup
ATT tapeadr MAINT 181
start the ddr program
DDR
and enter following parameters
sysprint cons
in 181 tape
out 191 dasd
RESTORE firstcyl TO lastcyl REORDER 0
in my example it would be RESTORE 653 TO 827 REORDER 0
You will be asked several times to confirm whar you are doing, but this is
selfexplenatory, I think.
After that you will have your maint 191 back. Hopefully, the backup is
actual so that your directory entries are complete.
If you have any further questions just drop me a note.
Regards
Franz Josef
----- Original Message -----
From: "Hugo Rivera" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, May 17, 2004 12:00 AM
Subject: New in z/VM....MAINT MNT191 A lost.
> Ouchg!!....I lost the MAINT minidisk MNT191 191 A. I formatted it. I have
the z/VM System backup copy done following the Guide for Automated
> Installation and Service when I installed it. I wouldn't want restore the
whole DASD (I'm scared), and even don't know which one I have to
> restore...440RES, 440W01 or 440W02.
> I already have a LINUX SuSE 8 running under z/VM and I want to clone that
image but I lost the USER DIRECT file....any help is very welcome...
> Thanks.
>
> Hugo Rivera
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
>
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
