"Wilson, Eric" wrote:

> Kim:
>
> Send us you output from:
>
> netstat -in

netstat -ln |more
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State

tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:113             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:79              0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:513             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:514             0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:23              0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN
udp        0      0 0.0.0.0:518             0.0.0.0:*
udp        0      0 0.0.0.0:517             0.0.0.0:*
udp        0      0 0.0.0.0:111             0.0.0.0:*
raw        0      0 0.0.0.0:1               0.0.0.0:*               7
raw        0      0 0.0.0.0:6               0.0.0.0:*               7
Active UNIX domain sockets (only servers)
Proto RefCnt Flags       Type       State         I-Node Path
unix  0      [ ACC ]     STREAM     LISTENING     318    /tmp/.font-unix/fs-1

> netstat -rn

netstat -rn
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo


> ifconfig -a

ifconfig -a
ctc0      Link encap:Serial Line IP
          UP POINTOPOINT RUNNING NOARP  MTU:1500  Metric:1
          RX packets:3 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:3924  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0

> dmesg

xpraminfo:  number of devices (partitions): 1
xpraminfo:  size of partition 0 to be set automatically
xpramdebug:  memory needed (for sized partitions): 0 kB
xpramdebug:  partitions to be sized automaticallys: 1
xpraminfo:  hardsector size: 4096B
xpramerror:No or not enough expanded memory available
xpramerror:Giving up xpram
xpramwarning:Module load returned rc=-19
dasd:No device registered as 24065
ctc0: connected with remote side

 (end -- most of it scrolled off screen ....)

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to