I wonder if for some reason the 192.x address is NOT being used during
FTP. Is there a confirmation that the transfer is actually going through
the hipersocket?
Alan Altmark <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
05/28/2004 10:41 AM
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: Re: Did some extensive hipersocket
testing/benchmarking.... need help interpreting results.
On Friday, 05/28/2004 at 12:13 EST, "Lucius, Leland"
<[EMAIL PROTECTED]> wrote:
> Yepper, it does. I'm currently running with a 56KB MTU (on z/OS side)
and have
> tried lower. Never could get the FTP up very high. I even transferred
files
> between a TFS under z/OS and an ram disk under Linux. Thought it might
be I/O
> related. Helped a little, but still not where it should be.
Ummm...you have to have the same MTU on both sides. Make sure you have
MFS (OS= in IOCDS) at 64K.
Alan Altmark
Sr. Software Engineer
IBM z/VM Development
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
