Greetings, I posted something about this last week and did not get any response, so I'm writing again to see if anyone in the community of Linux and z/Series has had any experience with this. Is there any good documentation on how to build the TDBM side of the house and get that working? We currently have the SDBM working with authentication to a RACF backend, and it works great. We are currently struggling with the TDBM side. We are not sure of how to get it configured for TDBM and how to setup the Schema for the TDBM database. We are unsure of the parameters that need to be set for the slapd.conf file so that the TDBM loads correclty. Does anyone out there have any ideas or have had experiences with this and can give us some pointers, or maybe some better documentation on how this is done. We have been reading the Redbooks on this and have been unsuccessful so far.
Thanks, Cameron Seader This transmission may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or use of the information contained herein (including any reliance thereon) is STRICTLY PROHIBITED. If you received this transmission in error, please immediately contact the sender and destroy the material in its entirety, whether in electronic or hard copy format. Thank you. A1. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
