I thought I Had this down, but apparently not.....
I built a new Linux guest and I'm trying to get the thing to talk to a
hipersocket.
The devices 0ED3,0ED4,0ED5 , show up in /proc/chandev and /proc/subchannels
The Chandev entries:
Initialised Devices
read write data read write data chan port dev dev
memory read msck write msck data msck
irq irq irq devno devno devno type no. ptr name
usage(k) status status status
=====================================================================================================================
0x0003 0x0004 0x0005 0x9000 0x9001 0x9002 0x10 0 0x02022800 eth0
8192 good good good
Total device memory usage 8192k.
channels detected
chan cu cu dev dev in
chandev
irq devno type type model type model pim chpids use
reg.
===============================================================================
0x0000 0x0ed3 0x10 0x1731 0x05 0x1732 0x05 0x80 0xed00000000000000 no
no
0x0001 0x0ed4 0x10 0x1731 0x05 0x1732 0x05 0x80 0xed00000000000000 no
no
0x0002 0x0ed5 0x10 0x1731 0x05 0x1732 0x05 0x80 0xed00000000000000 no
no
0x0003 0x9000 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0100000000000000 yes
yes
0x0004 0x9001 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0100000000000000 yes
yes
0x0005 0x9002 0x10 0x1731 0x01 0x1732 0x01 0x80 0x0100000000000000 yes
yes
The Subchannels entries
calhoun:/etc/sysconfig/network # cat /proc/subchannels
Device sch. Dev Type/Model CU in use PIM PAM POM CHPIDs
---------------------------------------------------------------------
0ED3 0000 1732/05 1731/05 80 80 FF ED000000 00000000
0ED4 0001 1732/05 1731/05 80 80 FF ED000000 00000000
0ED5 0002 1732/05 1731/05 80 80 FF ED000000 00000000
The entry in /etc/sysconfig/network for hsi0 (ifcfg-hsi0)
indicates:
calhoun:/etc/sysconfig/network # cat ifcfg-hsi0
BOOTPROTO='static'
BROADCAST='192.168.252.255'
DATA_CHANNEL=''
IPADDR='192.168.252.14'
NETMASK='255.255.255.0'
NETWORK='192.168.252.0'
PORTNAME=''
READ_CHANNEL=''
REMOTE_IPADDR=''
STARTMODE='onboot'
UNIQUE=''
WIRELESS='no'
WRITE_CHANNEL=''
The only difference I can see betweent the two guest is that one has the
hipersocket devices on the 'working' sytem initialized.
Should I suspect a VM configuration problem? Any ideas welcome
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
