Sure - you can have hsi0 and eth0 at the same time - it is the same driver
but the adapters have different types. I have this on SLES8 and SLES9
systems.
Here examples for SLES8:
in /etc/chandev.conf specify:
#
noauto;qeth0,0xff00,0xff01,0xff02
noauto;qeth0,0x3100,0x3101,0x3102;add_parms,0x10,0x3100,0x3102,portname:GB3100
#
here the output of ifconfig:
ifconfig
eth0 Link encap:Ethernet HWaddr 02:00:00:00:00:10
inet addr:192.168.9.54 Bcast:192.168.9.255 Mask:255.255.255.0
inet6 addr: fe80::200:0:100:10/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1
RX packets:6033 errors:0 dropped:0 overruns:0 frame:0
TX packets:1042 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:1201916 (1.1 Mb) TX bytes:177846 (173.6 Kb)
hsi0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:10.168.9.54 Bcast:10.168.9.255 Mask:255.255.255.0
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:598 errors:0 dropped:0 overruns:0 frame:0
TX packets:1042 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:81990 (80.0 Kb) TX bytes:112448 (109.8 Kb)
Interrupt:3
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:21 errors:0 dropped:0 overruns:0 frame:0
TX packets:21 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1700 (1.6 Kb) TX bytes:1700 (1.6 Kb)
The problem seem to be the wrong deviceorder - you have to start with even
device addresses
read-write-data
even-odd-whatever (and write must be read+1)
Mit freundlichen Gr��en / Best Regards
Elisabeth Puritscher
Technical Marketing Competence Center & Linux CoC
Schoenaicherstr.220, D 71032 Boeblingen, Germany
Phone: +49-7031-16-3718
Fax: +49-7031-16-3232
Internet: [EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
