do you work under zvm. I'm not a linux expert, but could it be possible, that you have to format the device with ickdsf before using it with linux. The ickdsf command is INIT UNIT(addr) NOVFY PURGE VOLID(xxxxxx).
Franz Josef ----- Original Message ----- From: "Steve Gentry" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, September 09, 2004 8:27 PM Subject: Re: dasd isn't recognized > That's not the problem, it is already there. Linux doesn't know what to > do with it cause it doesn't have the correct label format. > Instead of thinking its an eckd as in dasd[eckd] it comes back with > dasd[diag] > > > > > > David Kreuter <[EMAIL PROTECTED]> > Sent by: Linux on 390 Port <[EMAIL PROTECTED]> > 09/09/2004 01:15 PM > Please respond to Linux on 390 Port > > > To: [EMAIL PROTECTED] > cc: > Subject: Re: dasd isn't recognized > > > did you add the virtual address dynamically? > echo add device range=0123 | >> /proc/dasd/devices > > then you can modify zipl.conf to add it permanently > > David > > > -----Original Message----- > From: Linux on 390 Port on behalf of Steve Gentry > Sent: Thu 9/9/2004 2:03 PM > To: [EMAIL PROTECTED] > Subject: dasd isn't recognized > > I had this happen quite a while ago and thought I had written notes on it. > Alas, I can't find them. > I can't get linux to recognize a new disk that I've add. Lets call it > dasdc I'm pretty sure it has something to do with the volume label or > something like that. > It also seems that it has to be formatted in a CDL format or recognized as > CDL. I just can't remember. > So could someone help? > Thanks, > Steve G. > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
