Hi, When I chose option 3 I was asked for 3 devices. The devices I gave (1200-1202) were not acceptable.
I don't want to use QDIO at this time. Non-qdio should be supported according to evrything I've read. Gadi -----Original Message----- From: Istvan Nemeth [mailto:[EMAIL PROTECTED] Sent: Thursday, October 21, 2004 2:04 PM To: [EMAIL PROTECTED] Subject: Re: SLES9 installation problem - again Linux on 390 Port <[EMAIL PROTECTED]> Ãrta 2004.10.21 11:56:07 idÅpontban: > Hi Vic, > > Thanx for your response, but .... > > OSD and OSE are valid for the TYPE paramter. Only OSA and OSAD are > valid for the UNIT paramter. I'm really not a z/Hardware expert, but if you really have OSA-_EXPRESS_ then normally you need qdio driver(3) not lcs (2), and qdio driver should work. You did not gave us information what happened when you choose OSA-Express... > > As I said, this worked fine in SLES8. > > Also ^c does not work (at least from the HMC). > > Gadi > If you want to have a shell, just simply select option 0 (no network) in the main menu, so you can do a 'dmesg', etc.. Istvan ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
