Hi ken, Last year, on a z800, I defined linux LPARs on IFL and yes the CPs showed as CF and this was OK. I think the meaning is "NOT LEGACY".
Jean-Pierre Baril Specialiste en technologies de l'information/IT Specialist Novipro Inc / 2055, rue Peel, bureau 701 Montreal (Quebec) H3A 1V4 Tel: (514) 744-5353 #244, Cel: (514) 891-6848, Fax: (514) 744-3908 [EMAIL PROTECTED] / www.novipro.com Ken Vance <[EMAIL PROTECTED]> Sent by: Linux on 390 Port <[EMAIL PROTECTED]> 2004-10-25 10:37 Please respond to Linux on 390 Port <[EMAIL PROTECTED]> To [EMAIL PROTECTED] cc Subject new IFL, question on HMC Hi, We just had two IFL engines installed on our z900 machine. When we look at the CPs defined, I can see the standard engines, and two engines that show CF on the icons. When we go the activation profile for the LPAR that we are going to run Linux in, I do not see any LINUX options for the CPs, just the dedicate for standard engines, and the dedicate for coupling facility engines. Do I just use this CF option, or should I also have a Linux CP option? Thanks, Ken Vance Amadeus ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
