Has anyone successfully connected to a VSWITCH from a RHEL 3 guest? In our
first go-around the real switch port we're connected to was configured as a
host port, and we were able to get through. When it was reconfigured as a
trunk port (where we want to be), I can't seem to make the connection. I'm
running kernel 2.4.21-9.
q vswitch all det
VSWITCH SYSTEM VSWF9 Type: VSWITCH Active: 1 MAXCONN: INFINITE
PERSISTENT RESTRICTED PRIROUTER MFS: 8192 ACCOUNTING: OFF
State: Ready
CONTROLLER: VSWCTL2 IPTIMEOUT: 5 QUEUESTORAGE: 8
PORTNAME: OSAF9 RDEV: F900 VDEV: FFF0
RX Packets: 0 Discarded: 0 Errors: 0
TX Packets: 58 Discarded: 0 Errors: 0
RX Bytes: 0 TX Bytes: 4872
Authorized userids:
L277747R VLAN: 4066 4067
SYSTEM VLAN: ANY
VSWITCH Connection:
Device: FFF2 Unit: 002 Role: DATA
VLAN: ANY Assigned by user
Adapter Owner: L277747R NIC: 2D00 Name: L277747R
Device: 2D02 Unit: 002 Role: DATA
VLAN: ANY Assigned by user
/etc/chandev.conf
noauto
qeth0,0x1d00,0x1d01,0x1d02,0,0
qeth1,0x2d00,0x2d01,0x2d02,0,0;add_parms,0x10,0x2d00,0x2d02,portname:L277747R
/etc/sysconfig/network
NETWORKING=yes
HOSTNAME=l277747r
VLAN=yes
/etc/sysconfig/network-scripts/ifcfg-eth1.4066
DEVICE=eth1.4066
BOOTPROTO=static
IPADDR=169.10.238.131
NETMASK=255.255.255.192
ONBOOT=yes
/etc/sysconfig/network-scripts/ifcfg-eth1.4067
DEVICE=eth1.4067
BOOTPROTO=static
IPADDR=169.10.238.194
NETMASK=255.255.255.192
ONBOOT=yes
/proc/net/vlan/config
VLAN Dev name | VLAN ID
Name-Type: VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD
eth1.4066 | 4066 | eth1
eth1.4067 | 4067 | eth1
Suggestions will be most appreciated!
Mark Wheeler, 3M Company
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
