What is causing this error when I use pvcreate? I thought I remembered
seeing something sometime ago about this --? I've used a mknod script I
found on the list, run mkinitrd and zipl -- ?
I'm stuck.
- Matt
scodw2:/ # pvcreate /dev/dasdaf1
pvcreate -- can't open physical volume "/dev/dasdaf1" to get its size
/proc/dasd/devices:
021f(ECKD) at ( 94:124) is dasdaf : active at blocksize: 4096, 600840
blocks, 2347 MB
scodw2:/ # fdasd -a /dev/dasdaf
auto-creating one partition for the whole disk...
writing volume label...
writing VTOC...
rereading partition table...
scodw2:/ # fdasd -p /dev/dasdaf
reading volume label: VOL1
reading vtoc : ok
Disk /dev/dasdaf:
3338 cylinders,
15 tracks per cylinder,
12 blocks per track
4096 bytes per block
volume label: VOL1, volume identifier: 0X021F
maximum partition number: 3
-----------tracks----------
Device start end length Id System
/dev/dasdaf1 2 50069 50068 1 Linux native
Does't show up ---
scodw2:/ # mke2fs /dev/dasda
dasda dasda2 dasdaa dasdab dasdac dasdae dasdag dasdai
dasdai2 dasdaj dasdaj2
dasda1 dasda3 dasdaa1 dasdab1 dasdad dasdaf dasdah dasdai1
dasdai3 dasdaj1 dasdaj3
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
