I am having some unusual results migrating my zVM network connection from a 100m LCS to a GigE qdio. I am running zVM 4.4 and SUSE SLES8 and I am trying to define an OSA-Express GigE port to zVM. This port would then pass thru from zVM TCP/IP to zVM Linux guest lans. I have attached my 3 qdio devides and defined the qdioethernet device and link. The device activates to zVM and I can ping the Cicso 3550 switch from zVM and also ping zVM from the switch. When I try pinging from a zVM Linux system behind VM TCP/IP I do not get a response. Also when I try pinging a guest lan host from the switch I do not get any response. The Cisco switch logs that it receives the ping request from a guest lan host and that it has replied but I do not get any response on linux and if I NETSTAT DEV on zVM the packets received counter does not increment. Anyone seen this before? Anyone have any ideas what I may need to fix this gigabit ethernet interface? THanks, Al Schilla State of Minnesota
---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
