Hello list - I'm having serious problems trying to fix my LVM configuration. I just extended the Volume Group lvmdev in 10 G to add 5 G to logical volumes vol2 and vol4 and everything was fine. I was able to see the vols with the new sizes and also the data after mount them. But, after reboot my linux server (z/VM/ Linux SLES 8 for zSeries) I got the messages showed below. I forget include the new physical volumes in /etc/zipl.conf and /boot/zipl so I believe that is the problem, but I'm no able to get a SSH connection to my Linux server to fix the problem. I've already tried start my eth0 interface using ifconfig eth0 up but no luck. I'll appreciate any help. Thank you.
EXT3 FS 2.4-0.9.18, 14 May 2002 on dasd(94,1), internal journal Scanning for LVM volume groups... LVM version 1.0.5(mp-v6)(15/07/2002) module loaded vgscan -- reading all physical volumes (this may take a while...) vgscan -- ERROR "vg_read_with_pv_and_lv(): current PV" can't get data of volume group "lvmdev" from physical volume(s) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found ..done Activating swap-devices in /etc/fstab... Unable to find swap-space signature Unable to find swap-space signature ..failedChecking file systems... fsck 1.28 (31-Aug-2002) /dev/dasda1: clean, 27163/290880 files, 172837/581016 blocks /dev/dasdb1: clean, 72254/300960 files, 371926/600816 blocks fsck.ext2: No such device or address while trying to open /dev/lvmdev/vol1 Possibly non-existent or swap device? fsck.ext2 /dev/lvmdev/vol1 failed (status 0x8). Run manually! fsck.ext2: No such device or address while trying to open /dev/lvmdev/vol2 Possibly non-existent or swap device? fsck.ext2 /dev/lvmdev/vol2 failed (status 0x8). Run manually! fsck.ext2: No such device or address while trying to open /dev/lvmdev/vol3 Possibly non-existent or swap device? fsck.ext2 /dev/lvmdev/vol3 failed (status 0x8). Run manually! fsck.ext2: No such device or address while trying to open /dev/lvmdev/vol4 Possibly non-existent or swap device? fsck.ext2 /dev/lvmdev/vol4 failed (status 0x8). Run manually! fsck.ext2: No such device or address while trying to open /dev/lvmdev/vol5 Possibly non-existent or swap device? fsck.ext2 /dev/lvmdev/vol5 failed (status 0x8). Run manually! ..failed fsck failed. Please repair manually and reboot. The root file system is currently mounted read-only. To remount it read-write do: bash# mount -n -o remount,rw / Attention: Only CONTROL-D will reboot the system in this maintanance mode. shutdown or reboot will not work. Give root password to login: Hugo Rivera SSA II County of Contra Costa Department of Information Technology 30 Douglas Drive, Martinez, CA 94553-4068 Tel: (925) 313-1309 Nextel: (925) 383-5781 Fax: (925) 313-1459 Pager: (925) 975-7479 email: [EMAIL PROTECTED] ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
