So leave the device defined to the guest but not have anything actually be
there... the system returns an error of some sort at IPL I would presume
but otherwise things are 'normal'
"Post, Mark K"
<[EMAIL PROTECTED]
m> To
Sent by: Linux on [email protected]
390 Port cc
<[EMAIL PROTECTED]
IST.EDU> Subject
Re: Removing a volume from your
system....
03/25/2005 02:12
PM
Please respond to
Linux on 390 Port
<[EMAIL PROTECTED]
IST.EDU>
Absolutely. Just update /etc/fstab, and be done with it. You don't even
need to take the system down.
swapoff /dev/dasda1
echo "set device range=200 off" > /proc/dasd/devices (assuming this is a
2.4 system)
And let your VM system programmer do a detach, or if you have cpint
installed:
hcp det 200
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Dennis
Wicks
Sent: Friday, March 25, 2005 11:05 AM
To: [email protected]
Subject: Re: Removing a volume from your system....
You don't even need the t/v disk. The dasd=xxx sets up the slots and if you
don't have a "device" attached there is still a dasda1 slot present. That
is
another advantage of VM!
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
