Hi Eddie: You can use yast from a telnet or ssh session and configure a new network device. If stuck without ssh or telnet you can use the 3270 and copy the configuration files from /etc/sysconfig/network and use sed or other line editor tool and configure the interface. David
________________________________ From: Linux on 390 Port on behalf of Eddie Chen Sent: Thu 4/7/2005 3:50 PM To: [email protected] Subject: Adding New Network interface I am currently running SuSE9 with one ineterface to GuestLAN. I want to add new interface to VSWITCH. On the proevious release, I need to do add modules.conf and chandev.conf for the new interface. How do I add a new network interface? ----------------------------------------- This message and its attachments may contain privileged and confidential information. If you are not the intended recipient(s), you are prohibited from printing, forwarding, saving or copying this email. If you have received this e-mail in error, please immediately notify the sender and delete this e-mail and its attachments from your computer. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
