i've doesnt yet try to play with mkinitrd (thats gonna be tomorrow), i've tried to install sarge from scratch, and now...
i've installed sarge from zero, no dist-upgrade or anything else, just from scratch, and after that, i've installed kernel-image-2.6....-s390x via apt, the news is that it doesnt require initrd, so i've rebooted the vm, and after that, i've received the following: VFS: Cannot open root device "dasda2" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0) HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 0030949E i've modified zipl.conf (now the parm line isnt in /boot/parmfile, it is in zipl.conf) from: parameters = ro vmpoff="LOGOFF" dasd=201 root=/dev/dasda2 to: parameters = ro vmpoff="LOGOFF" dasd=0.0.0201 root=/dev/dasda2 and its the same, the problem is that kernel 2.6 doesnt see dasda2, how could i resolve this? thanks --- Adam Thornton <[EMAIL PROTECTED]> wrote: > On Apr 14, 2005, at 8:19 PM, Lizbeth Ortiz wrote: > > > No, i just installed it via apt (apt-get install > > kernel-image-...) and modified zipl.conf adding > > ramdisk=/initrd.img (and of course i've runned > zipl) > > > Well, definitely run mkinitrd. See if that helps. > Although I'm > running my 2.6 systems with no initrd, but then I > also built the kernel > from source on them too, and made sure I didn't need > an initrd. > > Adam > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access > instructions, > send email to [EMAIL PROTECTED] with the > message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > _________________________________________________________ Do You Yahoo!? Informacisn de Estados Unidos y Amirica Latina, en Yahoo! Noticias. Vismtanos en http://noticias.espanol.yahoo.com ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
