Hi!
I am having problems installing the z/890 crypto accelarator (no
coprocessor) adaptor:
1. The module loads OK (z90crypt)
2. /proc/driver/z90crypt looks ok (see below)
3. But no character device appears on /proc/devices (I was expecting a
254 z90crypt)
I am on SLES8 31bit.
Any help would be appreciated, thanks.
Tiago
PS - here goes the output from /proc/driver/z90crypt
z90crypt version: 1.3.2
Cryptographic domain: 1
Total device count: 1
PCICA count: 1
PCICC count: 0
PCIXCC MCL2 count: 0
PCIXCC MCL3 count: 0
CEX2C count: 0
requestq count: 0
pendingq count: 0
Total open handles: 0
Online devices: 1: PCICA, 2: PCICC, 3: PCIXCC (MCL2), 4: PCIXCC (MCL3), 5: CEX2C
0000000000000001 0000000000000000 0000000000000000 0000000000000000
Waiting work element counts
0000000000000000 0000000000000000 0000000000000000 0000000000000000
Per-device successfully completed request counts
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
