Mark,
Thanks for your help on this. Unfortunately, we had to punt on this and
do a re-install of the golden image.
It was either that or tell management we still don't have the thing
setup the way we want in next week's staff
meeting. ;-)
Maybe, once we get settled and are happily cloning, I'll create a new
"golden" image and break it the same way, just to find out what I
screwed up.
-Matt
Post, Mark K wrote:
Matt,
Ok, this is actually good news. The changes between 2.4 and 2.6 in how
devices get initialized are massive, but the fact that both the modules
load and don't generate errors means that you are close. Unfortunately,
I haven't had the time to play with 2.6 stuff, so I don't think I can
take you any further, other than to say that an "ifup" command should
work now. If your network was configured previously, it should still be
so.
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Matt Gourley
Sent: Monday, June 27, 2005 12:22 PM
To: [email protected]
Subject: Re: RPMs to keep/purge after installation
lsmod does confirm that it's loaded. ifconfig -a, on the other hand,
still doesn't list anything. If I try to manually bring the interface
up by 'ifup qeth-bus-ccw-0.0.0700' I get "Interface is not available."
-Matt
Post, Mark K wrote:
Well, that looks like it worked. lsmod will confirm if it loaded, and
ifconfig -a should show an interface now (maybe).
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Matt Gourley
Sent: Monday, June 27, 2005 11:58 AM
To: [email protected]
Subject: Re: RPMs to keep/purge after installation
# modprobe qeth
qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.77.2.20
$/$Revision: 1
.98.2.11 $/$Revision: 1.27.2.5 $/$Revision: 1.8.2.2 $/$Revision:
1.7.2.1 $/$Revi
sion: 1.5.2.4 $/$Revision: 1.19.2.7 $ :IPv6 :VLAN)
Jun 27 11:56:35 LNXMSTR9 kernel: qeth: loading qeth S/390 OSA-Express
driver ($R
evision: 1.77.2.20 $/$Revision: 1.98.2.11 $/$Revision: 1.27.2.5
$/$Revision: 1.8
.2.2 $/$Revision: 1.7.2.1 $/$Revision: 1.5.2.4 $/$Revision: 1.19.2.7 $
:IPv6 :VL
AN)
-Matt
Post, Mark K wrote:
Ok, then what happens if you do a "modprobe qeth" command?
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Matt Gourley
Systems Administrator
Pennsylvania State University
Administrative Information Services - Infrastructure/Sysarc
Rm 25 Shields Bldg., University Park, PA 16802
(814) 865-8726
[EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Matt Gourley
Systems Administrator
Pennsylvania State University
Administrative Information Services - Infrastructure/Sysarc
Rm 25 Shields Bldg., University Park, PA 16802
(814) 865-8726
[EMAIL PROTECTED]
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
