Hi, gang.

I don't have any hands-on experience with the DS8100, but I would
suspect that 40 seconds would be a reasonable setting for MIH time out.

This sounds silly, I know, but is the device plugged into a wall socket,
powered up and correctly connected to the host?

Have a good one.

DJ

Lutz Hamann wrote:
> Rich,
>
> for DS8100 the MIH default seems to be 00:40 (40 seconds).
>
> That should be quite enough, shouldn't it  ?
>
>
>       ciao  Lutz
>
> -------------------------------------------------------------------------
> Lutz  Hamann
> BETA Systems  Software AG
> z/OS  System Engineering
> -------------------------------------------------------------------------
>
>
>
>              Rich Smrcina
>              <[EMAIL PROTECTED]
>              om>                                                        To
>              Sent by: Linux on         [email protected]
>              390 Port                                                   cc
>              <[EMAIL PROTECTED]
>              IST.EDU>                                              Subject
>                                        Re: HCPIIO1250I message from z/VM
>                                        V5.1 at z/VM IPL.
>              17.07.2005 16:51
>
>
>              Please respond to
>              Linux on 390 Port
>              <[EMAIL PROTECTED]
>                  IST.EDU>
>
>
>
>
>
>
> Do you have the missing interrupt handler time set sufficiently high?
> The newer DASD typically required that the MIH time be set high, you
> might want to check the documentation for the DS8100 or the hardware
> bucket doc for VM to determine what the correct value should be.
>
> mainframe_s390 wrote:
>
>>Hi,all
>>
>>Please teach me.
>>I added a new disk device(DS8100).
>>The address range is 1000-1F9F.
>>
>>Next message is showned at z/VM V5.1 every IPL.
>>
>>HCPIIO1250I Device 1000 cannot be varied online because a
>>time-out condition occurred.
>>・
>>・
>>HCPIIO1250I Device 1F9F cannot be varied online because a
>>time-out condition occurred.
>>
>>The SYSTEM CONFIG file of the z/VM.(Only DEVICES
>>statement)
>>DEVICES,
>> ONLINE_AT_IPL 0000-FFFF
>>
>>Please teach me the way of solution.
>>
>>-----
>>K.M.
>>
>>__________________________________
>>Save the earth
>>http://pr.mail.yahoo.co.jp/ondanka/
>>
>>----------------------------------------------------------------------
>>For LINUX-390 subscribe / signoff / archive access instructions,
>>send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
>
> visit
>
>>http://www.marist.edu/htbin/wlvindex?LINUX-390
>>
>
>
> --
> Rich Smrcina
> VM Assist, Inc.
> Main: (262)392-2026
> Cell: (414)491-6001
> Ans Service:  (360)715-2467
> rich.smrcina at vmassist.com
>
> Catch the WAVV!  http://www.wavv.org
> WAVV 2006 - Chattanooga, TN - April 7-11, 2006
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
> visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to