Thanks for the information................. >>> [EMAIL PROTECTED] 8/22/2005 9:40:42 AM >>> Just add -j to the line: mke2fs -b 4096 -j /dev/dasdd1
"The Church is near, but the road is icy. The tavern is far, but I will walk carefully." - old Hungarian Proverb Gordon W. Wolfe, Ph.D. Boeing VM Enterprise Servers 425-865-5940 -----Original Message----- From: Mike Lovins [mailto:[EMAIL PROTECTED] Sent: Monday, August 22, 2005 7:38 AM To: [email protected] Subject: Creating ext3 filesystem Can some one help me with the command format I need in the mk2fs command to create and exte filesystem. I am running SuSE 8.0 on a IBM System 390. I know that running mke2fs -b 4096 /dev/dasdd1 will create an ext2 filesystem...., but what is required to create the ext3 filesystem. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
