> -----Original Message----- > From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On > Behalf Of Alan Altmark > Sent: Thursday, September 01, 2005 11:09 AM > To: [email protected] > Subject: Re: IFL engine for z/VM > > > On Thursday, 09/01/2005 at 10:39 AST, Robert Kippers > <[EMAIL PROTECTED]> > wrote: > > Can you have mainframe (z800) and have IFL processor only without CP > > processor if you were to use the box for linux and z/vm only ? > > The z800 model 0LF can have 1-4 IFLs (The other models have at least 1 > standard CP.) FYI, you still must run the box in LPAR mode. > > Alan Altmark > z/VM Development > IBM Endicott >
Slight correction. The z800 can still run in "basic" mode. At least according to: http://www-03.ibm.com/servers/eserver/zseries/library/specsheets/pdf/gm1 30116.pdf unless there is something in the latest z/VM release that demands LPAR mode on the z800. I know that the newer z890, z990, and z9 series are LPAR only. -- John McKown Senior Systems Programmer UICI Insurance Center Information Technology This message (including any attachments) contains confidential information intended for a specific individual and purpose, and its' content is protected by law. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this transmission, or taking any action based on it, is strictly prohibited. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
