The key is: What directory are you running mksles9root in? i.e. where is it trying to build the mksles9root directory? If you're trying to create it in the same place, then it will complain; If you try to do it in another place, you may have better luck.
-- Robert P. Nix Mayo Foundation RO-CE-8-857 200 First Street SW 507-284-0844 Rochester, MN 55905 ----- "In theory, theory and practice are the same, but in practice, theory and practice are different." -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Tom Duerbusch Sent: Tuesday, September 27, 2005 10:12 AM To: [email protected] Subject: Re: mksles9root question Is that if you do your own or if you use mksles9root? I'm using mksles9root. It makes the directories. I had the s390 versions out there. It wanted me to remove them so it could create the s390x (not the author of the code, so I don't know why). Since there didn't seem to be a command switch, I thought there might be a "change this piece of code" to do what I want. I guess the way the current mksles9root works is that you rebuild from the iso images each time you want to switch from 31 bit to 64 bit and back. That might make some sort of sense if the iso images may be refreshed by some offline or unattended process. But it still takes a while to setup. Tom Duerbusch THD Consulting ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
