Hi Folks, I,m having problem to update my vanilla Sles 9 version - 64 Bits to SP2
I have an existing SLES9 GA - 64 Bits and trying to install the SP2 update. I down loaded the three ISO files from the SuSE Portal. All checked out ok with MD5SUM. I then uploaded them to a SLES9 system that we use as a software repository. Tried using FTP 'system update' and then tried the 'patch update' The system update ran and then stopped at or near the end of CD1. It would not pick up on CD2. I tried copyng CD1 and CD2 to xxx, created CD1 link and register xxx as a instalation source and didn´t work either. In both cases it would not pick up on CD2. Various messages thru the attempts as FTP and local directory, all seem to be that it cannot find the media or CD2. I do not recall having these types of problems with SP1 on SLES9 - 64 Bits. Anyone successfully applied the SP2 to an existing SLES9 GA - 64 Bits ? Installation Tree: lrwxrwxrwx 1 root root 6 Oct 21 13:58 CD1 -> sp2-9/ lrwxrwxrwx 1 root root 14 Oct 21 11:34 boot -> sles9/CD1/boot lrwxrwxrwx 1 root root 17 Oct 21 11:34 content -> sles9/CD1/content lrwxrwxrwx 1 root root 21 Oct 21 11:41 control.xml -> sles9/CD1/control.xml drwxr-xr-x 7 root root 4096 Oct 19 17:15 core9 lrwxrwxrwx 1 root root 18 Oct 21 12:29 driverupdate -> sp2-9/driverupdate lrwxrwxrwx 1 root root 11 Oct 21 12:29 linux -> sp2-9/linux lrwxrwxrwx 1 root root 17 Oct 21 11:41 media.1 -> sles9/CD1/media.1 drwxr-xr-x 3 root root 4096 Oct 19 17:15 sles9 drwxr-xr-x 9 root root 4096 Oct 20 10:14 sp2-9 drwxr-xr-x 2 root root 4096 Oct 19 17:22 yast It would be good if SOMEONE FROM SUSE COULD CLARIFY this - when upgrading from a vanilla SLES system to an SP2 level, should you point at an integrated install tree or just the mounted SP CDs? Thanks. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
