This problem needs a z/VM PTF to fix it. For z/VM 4.4 PTF UM31426 is needed
and for z/VM 5.1
PTF UM31428 needs to be installed.
Regards,
Bill
-~- Sometimes change requires a revolution! -~-
Lee Stewart
<lstewart.dsgroup
@attglobal.net> To
Sent by: Linux on [email protected]
390 Port cc
<[EMAIL PROTECTED]
IST.EDU> Subject
Reboot fails on SLES9 after SP3
01/31/2006 01:55
PM
Please respond to
Linux on 390 Port
Hi...
It seems like (aka: I haven't had the opportunity to definitively prove
it) after I've upgraded SLES9 systems to SP3 that reboot (or init 6, or
shutdown -r now) all shutdown cleanly, but don't restart. From the 3270
console these are the last messages:
Please stand by while rebooting the system...
md: stopping all md devices.
md: md0 switched to read-only mode.
Restarting system.
The virtual machine does seem to burn some cycles after, but it never
restarts until you manually re-IPL it.
Has anyone else seen this? Anyone know of a fix?
Thanks,
Lee
--
Lee Stewart, Senior SE
Sirius Enterprise Systems Group
Phone: (303) 798-2954
Fax: (720) 228-2321
[EMAIL PROTECTED]
www.siriuscom.com
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
