Another user who had this problem forgot to: 'CP SET VSWITCH name GRANT
uid' 

-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Kreiter, Chuck
Sent: Thursday, February 09, 2006 10:21 AM
To: [email protected]
Subject: First install of RedHat under z/VM

I have installed SUSE under z/VM and currently have 5 guests running.
In an effort to evaluate RH, I'm trying to get it to install under z/VM
as well.  z/VM is set up to use a VSWITCH to share the OSA port.  The
VSWITCH devices are 300, 301 and 302.  I'm getting the error:

qeth: received an IDX TERMINATE with cause code 0x4e

qeth: Initialization in hardsetup failed! rc=-5


when booting the RH install kernel.  I found a few others posted this
problem in the past.  

CP Q NIC DETAILS

Adapter 0300  Type: QDIO      Name: UNASSIGNED  Devices: 3

  Port 0 MAC: 02-00-00-00-00-04  LAN: * None               MFS: 8992

      RX Packets: 0          Discarded: 0          Errors: 0

      TX Packets: 0          Discarded: 0          Errors: 0

      RX Bytes: 0                    TX Bytes: 0

  Unassigned Devices:

      Device: 0300  Unit: 000   Role: Unassigned

      Device: 0301  Unit: 001   Role: Unassigned

      Device: 0302  Unit: 002   Role: Unassigned

 

redhat.conf:

HOSTNAME="removed"         
DASD="3A76-3A77"                                   
NETTYPE="qeth"                                     
IPADDR="10.xx.xx.xx"                               
SUBCHANNELS="0.0.0300,0.0.0301,0.0.0302"           
PORTNAME="eth0"                                    
NETWORK="10.xx.0.0"                                
NETMASK="255.255.0.0"                              
BROADCAST="10.xx.255.255"                          
SEARCHDNS="removed"                     
GATEWAY="10.xx.xx.x"                               
DNS="10.xx.xx.x"                                   
MTU="4096"                                         

IPv6 over IPv4 tunneling driver

divert: not allocating divert_blk for non-ethernet device sit0

qeth: loading qeth S/390 OSA-Express driver ($Revision: 1.145
$/$Revision: 1.113 $/$Revision: 1.36 $/$Revision: 1.11 $/$Revision: 1.9
$/$Revision: 1.10 $/$Revis
ion: 1.33 $ :IPv6 :VLAN)

qeth: received an IDX TERMINATE with cause code 0x4e

qeth: Initialization in hardsetup failed! rc=-5

SIOCSIFMTU: No such device

SIOCSIFNETMASK: No such device

SIOCSIFBRDADDR: No such device

lo        Link encap:Local Loopback

          inet addr:127.0.0.1  Mask:255.0.0.0

          UP LOOPBACK RUNNING  MTU:16436  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

 

sit0      Link encap:UNSPEC  HWaddr
00-00-00-00-00-00-00-00-00-00-00-00-00-00-00      -00

          NOARP  MTU:1480  Metric:1

          RX packets:0 errors:0 dropped:0 overruns:0 frame:0

          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0

          collisions:0 txqueuelen:0

          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

 


Any suggestions?

Thanks,
Chuck Kreiter
Lead Systems Programmer
State Auto Insurance

* This message was scanned by the corporate mail server for viruses and
objectionable content.

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send
email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
visit http://www.marist.edu/htbin/wlvindex?LINUX-390

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to