Hi Listserv,
Currently, I have a cloned system with everything in the root filesystem
"/" .
The zipl.conf looks like this :
[ipl]
target = /boot/zipl
image = /boot/image
ramdisk = /boot/initrd,0x1000000
parameters = "root=/dev/dasda1 selinux=0 TERM=dumb elevator=cfq"
I have now added 2 LVM's. One containing 1 volume and the other containing
4 volumes ( 2500-2504 )
I know I have to modify zipl.conf to bring them online.
The changes I made are :
parameters = "dasd=2500-2505 root=/dev/dasda1 selinux=0 TERM=dumb
elevator=cfq"
My question is this. My /dev/dasda1 is a mini-disk sitting on volume 2061.
Should my parm list read :
parameters = "dasd=2061,2500-2505
and what if volume 2061 is a 3390 mod 9 , which can hold several mini
disks.
What do I do then ?
Any advice or suggestions ?
Also, will adding logical volumes involve new drivers, ie do I have to run
mkinitrd ? The logical volumes are all 3390's mod 9's and the mini-disk is
a 3390 mod 3. I think they should all use the same ECKD drivers
Thanks in advance,
Bernie Wu
[EMAIL PROTECTED]
The information contained in this e-mail message is intended only for
the personal and confidential use of the recipient(s) named above. This
message may be an attorney-client communication and/or work product and
as such is privileged and confidential. If the reader of this message
is not the intended recipient or an agent responsible for delivering it
to the intended recipient, you are hereby notified that you have
received this document in error and that any review, dissemination,
distribution, or copying of this message is strictly prohibited. If you
have received this communication in error, please notify us immediately
by e-mail, and delete the original message.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
