Linux experts:
I am trying to force one network connection to be eth0 and another eth1 but after an IPL, the lower OSA triplet address is eth0 and the other eth1. Is DEVICE= being ignored in the network files? zVM 4.4, SuSE SLES 9, kernel 2.6.5-7.191-s390x OSA C00-C02 attached * OSA E00-E02 attached * /etc/sysconfig/network/ifcfg-qeth-bus-ccw-0.0.0E00 contains DEVICE=eth0 and IPADDR=10.203.221.15 /etc/sysconfig/network/ifcfg-qeth-bus-ccw-0.0.0C00 contains DEVICE=eth1 and IPADDR=10.203.221.45 /etc/sysconfig/hardware files have the correct CCW_CHAN_IDS. Cat /proc/qeth shows eth0 on C00 and eth1 on E00 Ifconfig has eth0 with IP of 10.203.221.45 and eth1 with IP of 10.203.221.15 Any suggestions? Betsie Spann ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
