hi, I am currently having problems installing SLES9 on an virtual linux on ZVMV5R10.
I have copied reader files etc and setup the linux install exec, edited configuration details into parmfile. I IPL the install I am getting "eth0: duplicate address detected!" error when eth0 is being configured. there is no other server with the same IP address. here is my parmfile; ramdisk_size=65536 root=/dev/ram1 ro init=/linuxrc TERM=dumb INST_PASSWORD=numpty IP_ADDR=10.100.80.122 AUTOINSTALL=yes IP_HOST=sles9.dundeecity.gov.uk IP_GATEWAY=10.100.80.1 IP_INTERFACE=qeth IP_MTU=1500 IP_BROADCAST=10.100.80.255 READ_DEVNO=402 WRITE_DEVNO=403 DATA_DEVNO=404 PORTNAME=dontcare IP_DNS=172.16.1.1 INST_INFO=nfs INST_IP_ADDR=10.100.1.24 INST_IP_DIR=/home/sles9/sles9root INST_SCREEN=VNC VNC_PASSWORD=xxxxxx can anyone point me in the right direction? thanks. gordon. ----------------------------------------------------------------------- --------------------------- This email and any files transmitted with it is confidential and intended solely for the person or organisation to whom it is addressed. If you are not the intended recipient, you must not read, copy or disseminate the information or take any action in reliance on it and it would be appreciated if you would also notify the sender by reply email and then delete this email immediately. All messages passing out of this gateway are checked for viruses but Dundee City Council strongly recommends that you check for viruses using your own virus scanner as the Council will not take responsibility for any damage caused as a result of virus infection. ----------------------------------------------------------------------- --------------------------- ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
